Here Is The Ultimate Guide To Buying Table Saw Blades!

If you are into woodworking even for a couple of weeks, you know the importance of choosing the right saw blade for your table saw. In fact, the table saw is only as good as its blade – even if you have invested in the most powerful table saw. Investing in a low-quality blade is a waste of your time and money because it may ruin your woodworking project by making imprecise cuts. Shopping for the best table saw blade isn’t easy. You should be spot on with your homework when buying a quality saw blade for your table saw. We’ve assembled a comprehensive guide that lets you learn everything you need to know when shopping for the best table saw blade.

The first thing you need to know is the size of your saw blade. Many newbie woodworkers forget this step and order the wrong size for their table saws. You can easily find the size of your saw blade by referring to the manual that comes with the product. If not, you may have to remove the blade and measure its diameter before ordering the new blade. Most table saws use either a 10-inch or 12-inch blade. But there can be table saws that use other diameters. It’s important to use the right saw blade with your table saw for ease of use and safety purposes.

The blade material is another important factor to consider when shopping for the best saw blade for your table saw. When it comes to choosing the right material, there are two aspects to consider. You should know about the material of the plate as well as the material used to make the teeth of the blade. All saw blades are not created equal. There are cheap saw blades that won’t deliver the results you expect from your woodworking projects. Don’t scrimp on the blade when you have invested a significant amount of money on a quality table saw. Some of the highest quality saw blades are made from laser-cut steel and the teeth are made of C4 grade carbide using microscopic grains.

The tooth count is another factor to consider when shopping for the best saw blade on the market. Tooth count refers to the amount of teeth on the blade. The fewer teeth the blade has, the quicker and more aggressive the cut is. But there is a trade-off for having fewer teeth on the blade. Such a blade will give a rough finish on every cut – which needs to be cleaned up later on. In fact, this type of blade is ideal if you are making only rip cuts. Making cross cuts mean you will get a lot of tear-out. Blades with a higher teeth count will give cleaner cuts. But the feed rate will be slower because the smaller gullets of the teeth will remove less material per cut. Make sure you opt for the right blade depending on the type of your woodworking project.

The thickness of the blade is known as “Kerf.” The kerf width is another important factor to consider when opting for the best saw blade for your table saw. Narrow blades are better because they make thinner cuts and take out less material in the process. The thinner blades will make more precise cuts compared to the broader ones. If you have tight tolerances, you should opt for a thin blade for your table saw. The thickest blade comes with a kerf width of 1/8″ while the thinner ones are about 3/32″ thick. If your table saw is lesser than 3hp, a thin blade is your best bet. On the other hand, if your saw blade is 3hp or more, it will have the power to use a blade with a kerf of any thickness. A blade with a thicker kerf will get the job done easier if you are having such a table saw.

Most cheap blades are thin. But they can easily bend or flex when performing a cut. This may lead to irregular or horrible cuts in the process. Even though you should opt for thin blades for precision, make sure the material of the blade is strong enough for the cut. Your research is extremely important when shopping for the best saw blade for your table saw.

The type of job determines the best saw blade for your table saw. Different types of woodworking projects require different types of blades. When ripping a board, you want to break it into different parts of various sizes. You need a combination blade with forty or more teeth for this type of job. Such a blade will give you a quick and clean cut which you don’t need to do a lot of sanding afterward. You may attempt the same project with a 24-tooth blade, but you won’t get a smooth cut by using such a blade. You may need to cut off chips and pieces afterward to resize the board. Crosscutting needs a blade with 60 or more teeth to minimize the tear-out.

The gullet is the space between the teeth on the saw blade. These spaces are important to collect the chips that are generated during the sawing process. A deeper gullet will collect more material. If you have a ripping project, the material will be cut at a quicker rate and a lot of chips will be collected. So you need a deep gullet for such a project. When performing a crosscutting job, small chips will be collected at a slower rate. The gullet becomes shallower for such projects. It helps prevent a fast feed rate when crosscutting. These are some of the most important factors to consider when shopping for the best saw blades on the market.

Are you shopping for a quality table saw blade on the market? If so, you have come to the right place. This comprehensive guide will let you learn everything you need to know when shopping for the best table saw blade.