DELTA 36-L352 3 Unisaw Table Saw
Features a heavy cast iron cabinet and a single cast trunnion assembly to keep vibration to a bare minimum. You can expect extremely accurate, consistent and repeatable cuts with this Unisaw.
Includes a top of the line 52″ Biesemeyer Fence System. Blade angles can be set to 1/4-degree accuracy with the bevel dial. Again, you get quality, consistent and repeatable operations every time.
If you are online looking for a Delta Unisaw then you are probably either comparing specifications or looking for the best price. I always check the world’s largest supplier of woodworking machines before I buy anything just to put my mind at ease that I’m receiving the best possible price.
With the weight of this saw along with a single cast trunnion assembly you get incredibly smooth and consistent cuts. This saw will pass the vibration ‘nickel test’.
The two wheels on the cabinet front allow for the adjustment of blade height and blade tilt angle.
The front bevel on the front of the cabinet allows you to fine tune the blade tilt. You will no longer need a digital angle gauge on the saw blade to accurately set the bevel angle.
This Unisaw sets on a cast iron base that is heavy and provides excellent stability and minimal vibration.
Uses standard 10″ table saw blades
Features a heavy cast iron cabinet and a single cast trunnion assembly to keep vibration to a bare minimum. You can expect extremely accurate, consistent and repeatable cuts with this Unisaw. Includes a top of the line 52″ Biesemeyer Fence System. Blade angles can be set to 1/4-degree accuracy with the bevel dial. Again, you get quality, consistent and repeatable operations every time.
You will get accuracy, consistency and efficiency from the Delta Unisaw 36-L352. It includes a Beisemeyer 52″ professional fence system along with a storage drawer. You can order a Unisaw with either a 3 horsepower or a 5 horsepower motor. Large Table Top
The table top is over sized so you get a lot of support for panel cutting or cutting long lumber pieces. Cabinet Base is Cast Iron base coupled with the single cast trunnion assembly means virtually no vibration at all.
Push button arbour lock means changing the blades is a snap. No more cuts or scrapes. Plus the blade opening is over sized to make getting to the arbour nut easier and adjusting the riving knives or splitter easy too. Convenient Dust Collection
Keeping dust to a minimum should be important to any shop owner. A cleaner workplace is healthier and safer. This Unisaw uses to separate dust collection methods but you only have to connect one extraction hose. The cabinet bottom is sloped toward the extraction port to assist in dust collection and the cabinet is better sealed around the height and tilt adjustment wheels to allow better vacuum from your dust collection system.
Built in Storage Drawer
You can store your tools and the table saw accessories in the included storage drawer. The drawer is large enough to store just about everything you need. There’s room for blades, tools, riving knives, split guard assembly and more.
Split Guard and a Riving Knife that Raises and Lowers
The blade guard system is split and allows for the riving knife to raise and lower with the blade height. For added safety you can attached anti kick back pawls to the riving knife without any tools.
Biesemeyer 52″ Fence System
Incredible accuracy with the built in hairline pointer in the Biesemeyer fence system. Includes a built in measuring system tape so you can get accurate, consistent and repeatable cuts easily.
The Beisemeyer fence sides are multi ply with 9 plys. You get tight tolerances along with a fence that locks securely in place via a front lever. Delta/Unisaw Warranty
The DELTA 36-L352 10″ table saw (Unisaw) and the included 52″ Biesemeyer Fence System are covered by the 5-year warranty.
More Product Details
Motor is a 3 horsepower (5 horsepower is available), 240 VAC, high speed, high torque motor. Blade tilts left when being viewed from the front of the table saw. Includes Biesemeyer 52″ Black Fence Rails and black fence body too with 9 ply sides.
You can’t’ go wrong with a Delta Unisaw, it comes with a 3 horsepower motor and is packed with lots of great features you would expect in a table saw like this.
This is a base with wheels, sometimes called a mobile base and is made by Delta. The Delta 50-289 is designed for their Delta Unisaws. The real benefit is that you can easily move.
If you have a table saw, then you need a blade guard and if you have a nice commercial Delta table saw then you need the DELTA 78-958 Table Saw Mounted Blade Guard.
The blade guard
The Delta 34-976 table saw blade guard does not interfere the operation of the table saw fence like some competitive models do. It uses a double “L” design.
The Delta Unisaw table saw Model 36-L552 is a very powerful table saw and comes standard for use with 220VAC. It is a standard 10″ table saw and the blade is designed to left tilt.
DELTA 36-L352 Score
3.9 out of 5
score taken from 19 reviews